Ativar MPLS TE Huawei

mpls
 mpls te
 mpls rsvp-te

ospf 1 
	opaque-capability enable
 	enable traffic-adjustment
 	area 0.0.0.100
  		mpls-te enable

Interface L3 OSPF

 mpls
 mpls te
 mpls rsvp-te
 mpls ldp

Configurar túnel

Configurar Templates com os peers de MPLS

pw-template PE-POP-A
peer-address 10.99.99.1
control-word                           

pw-template PE-POP-B
peer-address 10.99.99.3
control-word

Criar os Path de Ida e volta

explicit-path PE-POP-A-POP-B-A
next hop 172.17.17.97 (Ip enlace mpls)
next hop 172.17.17.93
next hop 172.17.17.89
next hop 172.17.17.85                   
next hop 172.17.17.81
next hop 10.99.99.1 (IP loopback ultimo roteador)
#
explicit-path PE-POP-A-POP-B-B
next hop 172.17.17.45
next hop 172.17.17.13
next hop 172.17.17.9
next hop 172.17.17.5
next hop 172.17.17.1
next hop 10.99.99.1

Criando o Tunel

interface Tunnel1
description CLIENTE-A
ip address unnumbered interface LoopBack1
tunnel-protocol mpls te
destination 10.99.99.1 (ip destino )
mpls te tunnel-id 1060
mpls te record-route
mpls te path explicit-path PE-POP-A-POP-B-A (caminho primario)
mpls te path explicit-path  PE-POP-A-POP-B-B secondary (caminho secundario)
mpls te backup hot-standby mode revertive wtr 15
mpls te backup ordinary best-effort
mpls te reserved-for-binding           
mpls te commit

tunnel-policy PE-POP-A-POP-B-A
tunnel binding destination 10.99.99.1 te Tunnel1

no transporte que quero manipular

interface Vlanif1060
description MPLS_TRANSPORTE_CLI_B
mpls l2vc pw-template PE-POP-A-POP-B-A 1060 tunnel-policy TE_TRANS_WEBL_B raw
mpls l2vpn flow-label both
statistic enable both

Tracert

tracert lsp te Tunnel 1 primary